amazing homemade gasifier uses wood pellets to run generator — renewable alternative energy video

Gasifier uses wood pellets to create flammable mixture that a generator can run on without gasoline. This video shows how it was constructed, how it works, and how to use it from start to finish. Great project for anyone looking for alternative energy or wanting to live off the grid.

Just for some clarification — I mention a rheostat that I ordered; I ordered a 25w 20 ohm rheostat. That rheostat will effectively give me the control to adjust the voltage to the blower motor from 12v down to nearly 0v (I think… I’m not an electrical engineer).

Magnet Motor, New Design Sine Wave Concept Idea, Free Alternative Energy, Sine Wave, Electric

Magnetic Sine Wave Pulse, Create Electricity Generator, Rare Earth Magnets. New Concept. Neodymium Magnets

Dean Elliott Productions – Nov 6, 2015

I started with this idea after watching hundreds of videos on magnet motor attempts over the past 6 or 8 years..

After seeing the same ideas rehashed over and over I set out to figure out a way to beat the sticky spot that seemed to be the main barrier to all of the inventors and researchers of magnetic energy. So I came up with the sine wave idea that I call the MAGWAVE.

But for now, I want to throw this new concept out there in hopes that a few people will adopt my design and run with it. Like any other person I want some credit for my contribution, but I really want to see some new fresh ideas on how to finish this experiment.

My challenge to the other inventors is to copy my design or at least the concept and make a sine wave pattern magnetic motor of their own. You can employ any other items or concepts that you think will make this work. One item that I will suggest is Curved Linear Rail from tpa-us.com?. I urge you to post a video on what you accomplish. But please don’t post any sine wave magnet motor attempts or solutions until Feb 1, 2016. That way everyone can come up with their own idea and not one from your seeds.

I found this out by accident after making the video that is linked here. OMGosh, my focus on sine wave has brought so many new possibilities into view. Here are the secrets I found. 1st of all do not use the end poles of the magnets. That is our big repeated mistake. Use the area between the center and the poles on either side. This requires long magnets or connecting several magnets. Then use that energy just beyond the inert zone. And walah that area is like a monopole. This makes the area of travel between attract and repel very small requiring very little movement or oscillation that can be viewed as a sign wave motion on the rotor. I am gonna get a 3d printer to make some precise parts.

I just don’t have the resources to be able to pursue this as it should be done.

Thanks
Dean Elliott
Video Rating: / 5

39 thoughts on “amazing homemade gasifier uses wood pellets to run generator — renewable alternative energy video”

  1. Its only renewable if you replant the the trees that got cut down for the wood! I bet you havnt planted a tree in ya life!

    Reply
  2. from the vids ive seen on gasifier`s the gas works better when cooled. So the oil drum on this one could be used to collect heat by wrapping tubes/pipes around the drum. so not only would it cool the drum but would make use of the waste heat in a similar way to `combined heat and power stations(CHiPS) as used in eastern block countries

    Reply
  3. Great job! Thank you for explanations. If you come to Kazakhstan, Russia or China let me know we very welcome for you!

    Reply
  4. Interesting, one question; does the gas affect the long term running of the generator -would any additives be required to prolong the life of the motor?

    Reply
  5. You can use a fast linear actuator with a magnet attached to it to run this motor. But then it'll be like a motor running another motor.

    Anyway, I really see no point of new concept motors unless it is more efficient or has more torque and speed…

    Reply
  6. Moving the magnet in your hand and forcing it into the oposing magnetic field requires even more energy than the rotor provides, it is the same as rotating the rotor by hand. The mechanism is not overunity.

    Reply
  7. you don't even need the magnets. you can just put it in motion touching it directly – it will keep spinning until friction has transformed all the energy into heat that you put in with your hands. It makes no difference whether you touch it directly, or move the magnet with your hand and have the magnetic force translate the energy from your hand to the cylinder. I suggest you study some physics, understand what a force field is, what work and energy means, and understand what happens on a closed path in a conservative force field.

    Reply
  8. Hello Mike, I absolutely love the design. This is amazing. Although I have not built this unit yet, I can see that it is superior. This is a major breakthrough!!! Let me help you in return: All you have to do now is to look into the mechanism of a windshield wiper, heck even pick one up from a scrapyard. Take the rotation of the drum and turn it 90 degrees… there are mechanical solutions, then take the rotation into the windshield wiper mechanism and voila you will have it. Truly spectacular!

    Reply
  9. nice work on studying the sine wave relationship mate. im sure other cool people will make good use of your results or insight

    Reply
  10. You need a tubular cilinder above, with a lubricate magnet inside, and 2 magnets atached to you rotatory thing. When those magnet get close to the edge of the cilinder, it will push the magnet inside to the other edge, there you put another to push it, and there you got an automatic cycle. You already did the hard part.

    Reply
  11. Permanent magnets are not a source of energy. Hence, producing continuous torque on a rotor shaft can never be achieved using permanent magnets alone.
    The magnetic field of a permanent magnet can store energy, much like a spring, but once that energy is released, the game is over. Notice that it takes just as much energy to separate two attracting magnetic poles, as can ever be recovered when then are permitted to come back together. In the real world, some energy is always lost to waste heat along the way. Hence, you can't even break even over a single cycle. Notice that many videos showing 'working' magnet motors, work only as long as it takes for the initial spin to run down. The magnets provide zero positive torque.

    Reply
  12. this makes sense with some added electronics u can get the magnet to move were u want it and now the trick is to make enough electricity to run both the magnet and to produce for an external source I think I will mess with this some come tax time will get back ounce I've made progress I've thought of similar models but not like this the sine wave makes perfect sense

    Reply
  13. Dean,Thanks for your excellent demonstration. You definitely are onto something that is worth pursuing and may be very significant in the development for all the folks that are trying to get things like this going. God bless you for your effort,Steve Cates

    Reply

Leave a Reply to Peter FIAM Cancel reply

fifteen − 8 =